
MOTORIZED / MANUAL TURNTABLE
- Smooth and easy to operate Large Diameter Truck Turntables turned by just one operator.
- Their simplicity of design and ease of manual operation provides cost effective results.
- Railquip can custom engineer a turntable in any configuration, size or capacity to suit your needs.

TRUCK DROP TABLE
The Truck Drop Table (TDT) is used to remove trucks from rolling stock vehicles in a safe and economical manner. The Truck Drop Table is installed in a pit working within three tracks. The rail bridges are installed at both outer tracks (track 1 + 3) supported by concrete and connected to the existing workshop rails at each side. Track 2 is used as supply track for the exchange of the trucks.

WHEEL-SET CHANGING SYSTEM
The Wheelset Changing System is developed and designed to ensure quick and efficient change of wheelsets on Train Systems. This development grants best suitable access to all major parts of the wheelset during disassembly and reassembly works. Maintenance staff/operators are standing safely on pit level -1.850 mm between the rails on both sides (front and rear) of the Wheelset Changer and at level -950 mm on both sides of the wheelset to be changed.

MOBILE & STATIONARY TRAIN WASH UNITS
Fleetcleaner – Specifications Series 5000 (Catch Basin)
- Engine Brand Kohler / Kubota
- Type gas / diesel
- Horse Power 25 / 28
- Cylinders 2 / 4

BATTERY POWERED WASTE REMOVAL CART
As an alternative to the trailer mounted systems, these battery powered carts are suitable for use in smaller train stations where stationary systems cannot be justified.The entire pump system runs off of the batteries. There is no need to access power during operation.SF carts are equipped with adjustable working lights to increase flexibility. Track illumination is not required.

INTERMODAL CAR LIFT SYSTEM
The Hydraulic Intermodal Car Scissor Lift Table is powered by a Honda engine mounted on top of a hydraulic tank equipped with wheels for easy portability. The lift can either be operated from the control mounted on top of the pump unit or with a remote control – which is standard equipment. The 25′ electric pendant control (waterproof) is equipped with stop and start buttons.

MECHANICAL WHEEL HANDLERS
- Low height requirements
- No special training
- No hydraulic hook up required
- Mechanical lock to wheel

MOBILE AND STATIONARY SAND FILLING SYSTEMS
Mobile sand filling systems for the environmental friendly supply of rail vehicles with brake sand enjoy a good reputation all over the world. The experienced Railquip team offers support and advice, from the planning of your maintenance facilities and the construction of your sand boxes and/or their filling openings to extensive service and maintenance of the system.

RAILBOUND CRANES UP TO 172 TONS CAPACITY
The crane is equipped with a levelling device which levels the crane fully automatically when traveling into an elevated track section. Maximum super – elevation 6.3 inch. The levelling device guarantees to keep the crane’s centre of gravity point in the centre line of the rail track. Thus, the lifting capacities free on wheels remain unchanged even in elevated curves.

TRUCK TEST & ASSEMBLY STANDS
Truck Test & Assembly device consists of one (1) main frame, one (1) end carriage right, one (1) end carriage left, one (1) center carriage and guiding rails. Prior to assembling a truck, the transportation guards of the wheel cases have to be removed.

TRUCK TEST BEAM
- Railquip is proud to introduce the Portable Truck Test Beam.
- The Portable Test Beam with Stand is made out of carbon steel and primed with one coat of finish paint.
- Color: saftey Yellow

DIGITAL SWITCH GAUGE & CANT MEASUREMENT DEVICE
- The measuring system shows all measured values on a clear LCD-display. That mens all data are easily seen at a glance and reading errors or inaccuracies are avoided by thus
- Opto-electronic sensors eliminate reading errors and inaccuracy due to parallax. PTP is resistant to any electromagnetic effects and can be used in any weather.
- Illuminated LCD-display

SWITCH INSPECTION SYSTEMS
Flexible, mobile and reliable, one-person operation. No switch file booking sheets, no reading errors, but increased measuring accuracy and directly measurable values as well as their systematic capture, evaluation and storage… This is the latest version of switch measuring systems. It has been optimized on the basis of the knowledge, expirience and needs of its users…