PORTABLE ELECTRIC JACKS

 

Railquip, Inc.’s portable electric jacks for the rail transit / railroad industries are normally supplied as a set of four (4) lifting columns ( or multiples as required) controlled by a Central Control Console . Each jack is equipped with a fixed or horizontally movable lifting cantilever. The columns are movable by hand or may be designed to be moved electrically on an embedded auxiliary rail.

Underfloor Car & Truck Hoist and Body Stands

 

The truck hoist is designed for lifting bogies, maintenance, inspection, and repair work. Equipment consisting of 4 car hoists, 8 body stands, and complete electrical equipment.

Railquip-Rail-Service-60-Ton-Single-Axle-Drop-Table-3

SINGLE AXLE DROP TABLE

 

The drop table is used to release, lower, and transfer all single axle traction motors from any class 1 locomotives to and from a service track or multiple service tracks to a release area for replacement.

Railquip-Rail-Service-60-Ton-Single-Axle-Drop-Table-3

COUPLER LIFT SYSTEM 50-TON

 

The lift is positioned with a 12,000 lb. all-terrain short wheel base forklift truck underneath the couplers of two coupled cars or under a car with high centersill. It is hydraulically operated with remote control equipped hydraulic pump unit.

Railquip-Rail-Service-60-Ton-Single-Axle-Drop-Table-3

EGSXL 85 BUS/TRUCK LIFT

 

Each system consists of a set (4, 6 or 8) of individual, portable heavy duty lifts, connected to a Central Control Unit. The Central Control Unit contains a computer, which monitors and controls the operation of the lifting columns. Each column is cable linked to The Central Control Unit. The computer separately monitors each lift.

Railquip-Rail-Service-60-Ton-Single-Axle-Drop-Table-3

HEAVY DUTY MOBILE SUPPORT STAND

 

The support stand has a capacity of 22,000 pounds with a cradle support pad. The stand is adjustable from 49 inches to 71 inches, in increments of four inches (4″). The cradle support pad is fitted on a screw / nut irreversible device able to allow the fine adjustment of the stand pad under the load.

Railquip-Rail-Service-60-Ton-Single-Axle-Drop-Table-3

RQL70 MOBILE LIFT SYSTEM

 

Railquip’s RQL-70 Heavy Duty Mobile Column Lifts are available in configurations of 4,6 or 8 columns with a total combined lifting capacity as high as 132,000 pounds. A low friction recirculating ball bearing screw-nut assembly suspended from the top of the column provides the lifting power. The RQL – 70 Mobile Lift Column Lift System features microprocessor controls with automatic synchronization and communication between columns.

Railquip-Rail-Service-60-Ton-Single-Axle-Drop-Table-3

TANK SCISSOR LIFT

 

Comprised of a dual platform scissor lift complete with 20 HP hydraulic pump unit and 25 feet remote control.