The support stand shall have a capacity of 22,000 pounds with a cradle support pad. The stand shall be adjustable from 49 inches to 71 inches, in increments of four inches (4"). The cradle support pad shall be fitted on a screw / nut irreversible device able to allow the fine adjustment of the stand pad under the load. The adjustment of the screw shall be possible for a total adjustment of no less than four (4) inches so that any position between two of the above mentioned increments is possible. Each stand shall be equipped with a coil spring for assisting in height adjustments. Two (2) wheels and a handle shall be provided for easy maneuvering and displacement.

Available in 1,2,3, or 4 Scissor configurations Lifting Capacities of 22,000#, 44,000#, 66,000# and 88,000# May be either surface or recess mounted Incorporates the best safety and leveling systems in the industry 220-380 Volt, 60 Cycle, 3-Phase Lifting time: 50 seconds Lifting height: 65" from top of lift deck to floor Operating pressure: 60 - 90 PSI

Text follow's