Truck Test & Assembly stands

 

TRUCK ASSEMBLY STAND


truck-assembly-2

Truck Test & Assembly device consists of one (1) main frame, one (1) end carriage right, one (1) end carriage left, one (1) center carriage and guiding rails. Prior to assembling a truck, the transportation guards of the wheel cases have to be removed.

  • The geared axles will be positioned on the end carriage (right and left) and can be laterally moved into any desirable position.
  • The vertical positioning would also be done via hand wheel.
  • The motors will be mounted on the end carriages and are vertically adjustable via chain drives connected with a hand wheel.
  • The motors are positioned on the carrying plate with two (2) screw clamps.
  • The motors are laterally adjustable through the guiding rails.

 

Truck Test & Assembly device for dual-motor trucks consists of one (1) main frame, four (4) wheel supports equipped with rollers, one (1) gear box support on each end, one (1) ½ ton capacity motor hoist, one (1) 30,000 lb. pressure test beam, and four (4) truck tied downs.

  • The geared axles will be positioned on the end wheel supports (right and left) which can be laterally moved into any desirable position.
  • The gear supports are hydraulically adjustable in height.
  • The motors will be mounted with the aid of a ½ ton capacity chain hoist.
  • Pressure test beam will be operated hydraulically.

Contact Railquip

Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Please add code
  Refresh Invalid Input
Image 0
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6
Image 7