Truck Drop Table

drop-table-main2The Truck Drop Table (TDT) is used to remove trucks from rolling stock vehicles in a safe and economical manner. The Truck Drop Table is installed in a pit working within three tracks. The rail bridges are installed at both outer tracks (track 1 + 3) supported by concrete and connected to the existing workshop rails at each side. Track 2 is used as supply track for the exchange of the trucks. The rail bridges are mechanically locked with a locking system. Locking is controlled by an active limit switch, one at each locking device. The control is interfaced with the Master Control Cabinet (MCC) and can be interlocked to the traffic control of the workshop (by others).

Locking and unlocking of rail bridges is electrically actuated. After the truck has been placed on the rail bridges the platform of the Truck Drop Table will be raised until contact is made with the flanges of the wheels. A further lift of max. +1.97” will release the rail bridges. The rail bridges will be electrically unlocked and slide sidewards electrically motor-driven at either side. The platform with the disassembled truck can be lowered after the train body has been supported by the car body supporters which are movable in order to reach the support pads of the train body. The platform with the truck will be lowered to fully down position and moves sidewards on rails installed at the bottom of the pit to the track 2. Here the truck drop table with the truck will be lifted to T.O.R. level so that the truck can be rolled out. Replaced truck will be rolled on the TDT to be moved to the first track. During operation process safety features have to ensure that no train movement is on both tracks. Operation status of the TDT can be interlocked into the traffic control of the workshop (by others).


Potential free interface contact at the MCC of the Truck Drop Table will be provided by Railquip.

Technical Data of Drop Table

  • Max. Lifting capacity: 120 tons
  • Max. Lifting capacity (truck): 30 tons
  • Override (T.O.R.):  1.97”
  • Lifting speed: max. 1.6”/sec.
  • Max. Traversing speed: max. 19.7 ft./min
  • Operating voltage: t.b.a.
  • Control voltage: t.b.a.
  • Protection:  IP 55
  • Power supply: via energy chain

 

TECHNICAL DATA OF RAIL BRIDGE

  • Crossover capacity: 40 tons axle load
  • Number of axles: 3 axles
  • Axle distance: approx.: 78.7’
  • Length of bridge: min. 295”
  • Locks, electrically actuated: 4 nos./pair
  • Limit switch: 4 nos./pair

 

Technical Data of Car BOdy Supporting Portal

  • Capacity: 2 x 45 tons
  • Capacity per pair: 90 tons
  • Supporting area

       from T.O.R. +9.84” to 59”

Contact Railquip

Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Please add code
  Refresh Invalid Input
Image 0
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6
Image 7