A cable channeling system for the economic laying of cables and wires.

Low weight

Has been realized by utilizing suitable plastic materials. There are various benefits for the user in terms of construction and applications, which one could not reach with conventional systems.

FLEXIBILITY:

Obstacles can be avoided through the flexible system. The solutions are premanufactured angle-parts, or through easy on-site preparation of the plastic channelings.

Channeling can be put into pre-existing ground gravel, next to straight and curved lines on bridges, spans and difficult, hard to maintain zones , etc.

TECHNICAL FEATURES:
Weight: type I approx, 5kg/meter (3.4lb/ft), typeII 7kg/meter (4.8lb/ft).
Material: thermoplastic, UV stabilized polypropylene-copolymer.
Mechanical Properties: Load capacity without failure 10kN
Electrical properties: Surface resistivity up to 10^15ohms x cm. good insulator.
Thermal properties: Heat distortion temperatures at outside temperature is lower than -30ºC and higher than 85ºC. Due to the configuration of the covers, heat build-up is minimized.
Fire behavior: Acording to DIN 53438, part 2- flammability test, the plastic used is classified as K1.

ELEVATED CABLE DUCT:
The elevadet cable duct (AU-KA) was developed for use on slopes and slough territories
It advances the successful concept of the drainage cable duct.

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me

Name
Title
Company
Address
E-mail
Phone



Home