BOGIE ASSEMBLY STAND
Truck Test & Assembly device for Bogies consists of one (1) main frame, one (1) end carriage right, one (1) end carriage left, one center carriage and guiding rails. Prior to assembling a truck, the transportation guards of the wheel cases have to be removed.
bulletThe geared axles will be positioned on the end carriage (right and left) and can be laterally moved into any desirable position.
bulletThe vertical positioning would also be done via hand wheel.
bulletThe motors will be mounted on the end carriages and are vertically adjustable via chain drives connected with a hand wheel.
bulletThe motors are positioned on the carrying plate with two (2) screw clamps.
bulletThe motors are laterally adjustable through the guiding rails.

DUAL MOTOR BOGIE ASSEMBLY STAND

Vista222.jpg (80880 bytes)

VISTA

Truck Test & Assembly device for dual-motor Bogies consists of one (1) main frame, four (4) wheel supports equipped with rollers, one (1) gear box support on each end, one (1) ½ ton capacity motor hoist, one (1) 30,000 lb. pressure test beam and four (4) bogie tied downs.
bulletThe geared axles will be positioned on the end wheel supports (right and left) which can be laterally moved into any desirable position.
bulletThe gear supports are hydraulically adjustable in height.
bulletThe motors will be mounted with the aid of a ½ ton capacity chain hoist.
bulletPressure test beam will be operated hydraulically.

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me

Name
Title
Company
Address
E-mail
Phone



Home