ROOF ACCESS PLATFORM

The Mobile Electrically Powered Roof Access Platform is designed for 
performing repair and maintenance work on rail bound vehicles and aircraft in maintenance facilities.  
It is a free standing work unit and will not be supported against or touching the rail vehicle.  
The narrow width of 55 inches enables usage in the walk zone between tracks of most maintenance shops.  

The low position of the platform height, i.e. 74 inches, lends itself to perform tasks on the side of 
the rail vehicle such as exchange of window panels, sealing of windows, 
cleaning of windows and washing off graffiti.  The high position of the platform, 
i.e. maximum 220 inches, lends itself to any kind of maintenance work required on 
the roof top mounted equipment on rail bound vehicles or buses.  
The width of the telescopic work platform is 136 inches.  
It can optionally be equipped with a jib crane having a capacity of 440 lbs., work range 200 degrees. 
The vehicle is suitable to drive on surfaces with up to 12% gradient.

 

Platform height retracted:	75 in.
Platform height extended:	220 in.
Extended width of telescopic platform:	136 in.
Drive:	hydraulic / electric
Dimensions:	125 in. x 56 in.
Weight:	14,450 lbs.
Permissible load of ground platform:	794 lbs. or 4 persons plus 88 lbs. load
Permissible load of telescopic platform:	440 lbs. or 2 persons plus 88 lbs. load
Jib crane capacity:	440 lbs.
Jib crane boom:	110 in. with hydraulic plus 39.4 in.
Work range:	200 degrees